Led outdoor display screen traffic variable message signs
Basic Info
Model No.: WDM-P10XS
Product Description
P10 Led outdoor display screen traffic variable message signs
Types of highway displays:
1. Door frame type display screen: The door frame of the door frame type variable information screen is composed of two uprights and a beam. The column is provided with an annular ladder, and there is a maintenance channel behind the screen body, and the screen body is installed on the beam above the expressway.2. Side F type display screen:
F-type variable information screens are mainly set up at the entrances and exits of each interchange, in front of stations, service areas, tunnel entrances, etc., to provide drivers with information in a timely manner. The column is equipped with a climbing ladder, and there is a maintenance channel behind the screen.
3. Column type display:
Single-column or double-column display screens are mainly set up at various interchanges, highways, service areas, tunnel entrances, etc., to provide drivers with timely information.
4. Vehicle display:
The on-board display screen is composed of a box and multiple modules, and may also include multiple lamp tubes, flash modules, and lifting brackets. The screen body is installed on the car or on the lifting bracket with the back hoop.
our traffic display screens can be customized with pictures, high quality and low price, short production cycle, complete qualifications, diverse styles, can be customized according to customer needs, factory direct sales, affordable!
Box structure The display box material is made of cold-rolled board, non-reflective, anti-glare, fully enclosed, all-weather, weatherproof, and meets the IP65 protection level. The color of the surface is black, and the rust removal and antirust treatment should be done before spraying. Has good strength and wind resistance. Has good sealing and dust resistance.
P10 Led outdoor display screen traffic variable message signs Cooling system performance
There are four air outlets on the back of the box, the lower is the air inlet, and the upper is the air outlet. A dust-proof net cover is installed at the air inlet to prevent dust from entering the box body and maintain good ventilation inside the box body. There are multiple small fans in the box to speed up the air circulation inside the box and avoid excessive temperature of the module.
We has an independent park with a total area of 6000 square meters. The company's Production Line has more than ten imported automation equipment. The production quality is better, the efficiency is higher, and the delivery time is shorter. It is the best choice for customers.
In order to better test the quality of the display and the stability of its performance, the technical department needs to perform aging and performance tests on the products before they leave the factory. The test time is not less than 24 hours.
The company has its own water spray test vehicle. The LED is placed on the test vehicle, and a lot of water is used to spray the impact, forming the actual scene of heavy rain, light rain, and thunderstorm to operate, so that the LED display screen can be operated before leaving the factory. Carry out a large number of water spray tests.
After the display has passed a series of tests, it needs to be packaged. First, wrap the display with a wire drawing die to prevent dust, and then put thick foam cushioning on the display surface and four corners of the display to prevent impact damage during transportation ; Then put it in a carton for packing, and it needs to be fixed with a wooden frame in remote and overseas.
In addition to the P10 Led outdoor display screen traffic variable message signs, We also produces other traffic led display:
Solar Road Stud
Road Stud
P16 Led Display
P10 Led Display
Led Pixel cluster
Outdoor Led Display
Product Categories : Outdoor Led Display > P10 Led Display