Find Four Column Hydraulic Press, Deep Drawing Press, Hydraulic Press Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > hydraulic press > four column hydraulic press > Hydraulic press machine for solar water heater production line

Hydraulic press machine for solar water heater production line

Basic Info

Model No.: Y32-315T

Product Description

      Product Description Main body The main body is organized by press crown, beam, working table, uprights, locknuts and adjusting nut. There are guide sleeve to be employed inside the beam. The precise can be adjusted through adjusting the locknuts and adjusting nuts that tightened on the press crown. There are T-type channels on the beam and working table, so that the tools can be equipped convenience Main cylinder Main cylinder is fixed on the press crown Stroke limited equipment The stroke limited equipment is installed on the left side of the machine, it can control the stroke distance, the beam stroke distance can be adjusted by adjusting the distance of the travel switch. Hydraulic Station It’s including oil container, axial plunger pump, motor, two-ways cartridge valve, oil cleaner, air cleaner. Press gauge and overflow valve are equipped on the oil container so that the operator can observe the hydraulic pressure and adjust the oil pressure easily. Cartridge valve equipped for hydraulic system, reliable, durable and less hydraulic shock. The machine is equipped the hydraulic supporting safety loop to keep the security when the beam is out of control. Water cooler is employed to cool the temperature of the hydraulic oil to keep the oil temperature doesn’t exceed 55°C. When the oil temperature is over 45°C, connect the water cooler system, the system will give a alarm when the oil temperature is over 50°C; When the oil temperature reach 55 °C, the control system will cut off the power to keep the oil temperature not over 55°. Electric control system The electric cabinet is separate from the main structure, this machine is supplied with the moving operating panel so that the operator can operate machine at a big area range. Power: AC380V,50 Hz Operating system 1   Inch action Mainly used for adjust the machine and change tools, 2   Manual 3    Semi-automatic: press the respectively buttons to finish one working circle 3.1          Without knock out techniques, Beam down in no-load mode →beam switch to work mode by proximity switch → beam down in work mode till desired force achieved→ start time relay when desired force achieved → beam all way up after time on time relay runs out 3.2          With knock out techniques Beam down in no-load mode →beam switch to work mode by proximity switch →beam down in work mode till desired force achieved→ start time relay when desired force achieved → beam all way up after time on time relay runs out →knock out cylinder at upper limit start time relay→ knock out cylinder return after time on time relay runs out 3.3  Drawing techniques Beam down in no-load mode →beam switch to work mode by proximity switch → beam down in work mode till desired force achieved→ start time relay when desired force achieved → beam all way up after time on time relay runs out   4.Working environment  Temperature: 0°C - 40°C2.     Humidity: relative humidity is under 90%.3.     Voltage: 380V(-15%,+15%),3P,50Hz   Security protection Beam upper limited is protected by the light curter With “PAUSE” & “EMERGENCY STOP” button. With Second supporting loop for the main cylinder Security valve for hydraulic loop Main components Transformer:   Simens Middle relay:   Simens Time relay:  Simens Breaker:  Simens Thermal relay:   Simens Oil pump:  25YCY14-1B Chinese famous brand Main motor: Simens Valves: TAIFENG Seals: PARKER Buttons: Simens PLC: Mistsubushi  

YP32 series of four-column Hydraulic Press main specifications and technical parameters

Item

            Model

unit

YP32-200

YP32-315F

YP32-400A

YP32-500

YP32-630

YP32-800

YP32-1000

Nominal pressure (KN)

KN

2000

3150

4000

5000

6300

8000

10000

Knock-out pressure

KN

400

630

630

1000

1000

1250

2000

return stroke pressure

KN

360

600

830

930

850

720

1060

Max working force

Mpa

25

25

25

25

25

25

25

Ram stroke

mm

710

800

800

900

1000

1000

1000

Knock-out stroke

mm

250

300

300

300

300

350

450

Max.opening height

mm

1120

1250

1250

1500

1600

1600

1600

Ram speed

Free

mm/s

120

120

120

120

120

150

150

Work

7-18

6-12

7-18

7-15

6-12

6-12

5-12

Return

100

60

92

80

80

120

100

Knock out speed

Knock-out

mm/s

90

55

120

75

75

80

60

Return

160

100

210

160

160

160

120

Work table size

right and left

mm

930

1260

1260

1980

1880

1880

2000

Before and after

900

1200

1250

1600

1600

1600

1800

stand column distance


right and left

mm

1050

1400

1500

2200

2100

2100

2360

Before and after

700

900

950

1300

1200

1200

1400

height of worktable to ground level


 

mm

550

650

710

500

500

/

/

Motor power(KW)

kw

15

22

30

44

44

60

74

                  Product Description     Packaging & Shipping 1 PVC film covered hydraulic Shearing Machine 2.Whole machine fixed in the container with steel rope,very safe 3.Wooden case or pallet or iron box  4.If have stock,can provide right now  5.If no stock,small machine delivery time 7-15days.Big machine delivery time 25-40days.  6.Can give destination port best price or cost to the customer factory.   Our Services 1.All machines have been tested by 48 hours before ship out.

2.All products have 2 year warranty.

3.Supported 24 hours online service. If any problems happen, our team will do our best to solve the problems.

4.If any component is damaged during guarantee time. we can send the component to the customer by DHL freely.     Company Information 1.Name:Maanshan Hellen CNC Machine Tool Co.,LTD             Phone:+86-18755529493   Fax:+86-05556727629             Skype:cnchellen               Web: http://hlmt.en.alibaba.com/             2.Brand:HELLEN 3.Manufacture: hydraulic press, Press Brake,Shearing machine,Punching and Stamping machine,Iron worker.  

Contact us if you need more details on Hydraulic Press Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Press MachineHydraulic press. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : hydraulic press > four column hydraulic press

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters