different type of cutting machine,aluminium saw cutting machines

Specifications 1. CE standard;

2. SIEMENS electrics.

3. linear guideway and ball screws

4.Optional NC/CNC

5.Good price & quailty

CNC guillotine shear machine:   1.Frame structure Designed under LVD technology  Full steel structure, stress released, with accuracy well kept. Main component is designed and Finite Element Analyzed through ANSYS software. Main frame composes of uprights, working table, holding-down beam and oil tank. Ball transporter and supporting bar and squaring arm are fixed on working table.   2.Upper blade beam and blades Guillotine type blade beam, with rake angle adjustable The rake angle could be motorized adjusted by press button according to material and thickness. When shearing thin thickness sheet, the rake angle could be reduced, thus the distortion of the product and the burr could be minimized.  Exchangeable Rectangle blade, with 4 cutting edges available.  Blade material 6CrW2Si with hardness HRC53-60, with quality shearing result and long life.   3. Shearing length/stroke adjustment The shearing stroke could be adjusted through knob to the length of the product. Thus efficiency could be improved.   4. Cutting beam guiding and blade clearance The cutting beam is guided between roller guides. At the rear of the cutting beam there are two sets of upper and lower roller guides located at each end of the beam. Two spring-loaded rollers located at the front of the shear apply pressure to the cutting beam, forcing it against the back roller guides. The bearings of the upper roller guides at the back of the cutting beam are mounted on an eccentric shaft. Rotating this shaft causes the cutting beam to tilt, thus providing proper blade clearance to the shearing blades. The upper cutting beam inclined forward, with high section-cutting quality on the product. The blades clearance could be adjusted manually through hand-wheel according to material and thickness. Since the blade clearance is 0.1 to 2.5 mm, the shear can cut thickness 1mm to 40mm mild steel.   5. Hydraulic system LVD special hydraulic unit for heavy type shear is adopted. Hydraulic control components is from VICKERS,USA  (or REXROTH, Germany) With in-series cylinders to achieve good synchronization. The sheet is pressed by hold-down before shearing and during shearing for safety and reliability. One-time machining on CNC lathe for cylinder body and piston rod. Horning for inner surface of cylinder, vibration super-fine machining on the outer surface of the piston rod. Oil seals from NOK, Japan (or Merkel, Germany) with low wear and tear, no oil leakage. High-pressure internal gear pump, with reliability and low noise. Over-load protection for hydraulic system   6. Electrical system Movable remote operation station with emergency stop. Main electrical components(contactor, button and switch) adopt product from TELEMECANIQUE from France. Requirement on working condition: Working temperature: -10 to 47 Power supply: 380V±5%, 50HZ, 3 Phase   7. Shadow line lighting It is clear with shadow line lighting for a close and accurate view of the cutting line.   8. Motorized Back gauge The back gauge is driven by lead screw and normal motor. With electrical display, with stroke 1000mm.   9. Safety device Fence guard and protection switch for preventing finger being cut. Movable remote foot pedal with emergency stop    10. Key parts on shear

No.	Item	Brand	Origin
1	Pump	NACHI	Japan
2	Hydraulic valve	REXROTH	Germany
3	Seals	NOK	Japan
4	Main electrical parts	TELEMECANIQUE	France
5	Encoder	ELTRA	Italy
6	Filter	COMPASS	Taiwan, China
7	Main motor	ABB	China
8	Electrical display	KUBLER	Germany

  11.CNC controller:DAC310 and DAC360,DELEM ,Holand,etc.      

Hydraulic guillotine shear (Series QC11Y)
Model	Maximum Shear thickness mm	Maximum shear width mm	Shear angle °	Plate strength n/m2	Back-gauge station mm	Main motor kw	Dimension (LXWXH) mm	Weight kg
QC11Y-8X4000	8	4000	0.5°-2°	450	800	11	4620X1800X2050	9500
QC11Y-12X2500	12	2500	0.5°-2.5°	450	1000	18.5	3180X1800X2100	8200
QC11Y-12X3200	12	3200	0.5°-2.5°	450	1000	18.5	3980X1950X2310	11800
QC11Y-12X4000	12	4000	0.5°-2.5°	450	1000	18.5	4780X2000X2400	15500
QC11Y-12X6000	12	6000	0.5°-2.5°	450	1000	30	6800X2500X2950	28000
QC11Y-16X2500	16	2500	0.5°-2.5°	450	1000	22	3280X1900X220	10000
QC11Y-16X3200	16	3200	0.5°-2.5°	450	1000	22	3980X2000X2425	13500
QC11Y-16X4000	16	4000	0.5°-2.5°	450	1000	22	4780X2200X2520	17800
QC11Y-16X6000	16	6000	0.5°-2.5°	450	1000	30	6800X2600X3050	35000
QC11Y-20X2500	20	2500	0.5°-2.5°	450	1000	30	3300X2000X2380	14000
QC11Y-20X3200	20	3200	0.5°-2.5°	450	1000	30	4000X2280X2490	17000
QC11Y-20X4000	20	4000	0.5°-2.5°	450	1000	30	4800X2500X3000	28000
QC11Y-25X2500	25	2500	0.5°-2.5°	450	1000	37	3400X2300X2750	19000
QC11Y-25X3200	25	3200	0.5°-2.5°	450	1000	37	4100X2400X2580	24000
QC11Y-32X2500	32	2500	0.5°-3°	450	1000	37	3400X2400X2850	22000
QC11Y-32X3200	32	3200	0.5°-3°	450	1000	37	4100X2550X3000	28000
QC11Y-40X2500	40	2500	1°-3.5°	450	1000

           

Contact us if you need more details on Different Type of Cutting Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Aluminium Saw Cutting Machines、Aluminium Cutting Machines. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : shearing machine & cutting machine > CNC guillotine shearing machine